Yamaha Electone EL-87, Руководство пользователя

Страница: 81 / 156

77
[2] To record only the registrations and bulk data:
1
Set up the registrations and select the song number
as you did in steps #1 and #2 above.
2
Press the RECORD button.
3
Press the PLAY button to record the registrations,
then press the STOP button as soon as you see the
small bars flash across the LED display from left to
right.
The small bars that flash across the display indicate
that the M.D.R. is recording the registrations and
being set up for normal recording; pressing the STOP
button interrupts this process.
4
Recording Registrations
(and Bulk Data)
You can also record registrations by themselves, without
recording a performance. Bulk data, including
Registration Memory and Registration Shift settings,
Rhythm Pattern (User rhythms) and Rhythm Sequence
data, and User voices, is also saved in the operation.
There are two ways to record the registrations and bulk
data:
[1] To record only the registrations and bulk data:
1
On the Electone, set the registrations and all other
data you wish to record.
2
Select the song number to which you wish to record
the registrations.
3
While holding down the RECORD button, press the
M (Memory) button on the Registration Memory
panel.
Small bars flash across the LED display from left to
right, indicating that the M.D.R. is reading the
registrations and other settings. After recording, the
M.D.R. is automatically stopped and returns to STOP
status.