Yamaha Electone EL-87, Руководство пользователя

Страница: 76 / 156

72
If you make a mistake during recording:
1.
Press the PLAY button while the M.D.R. is still
running.
This stops the recording and returns you to the starting
point of the song.
The letters “rE” (retry) appear on the left side of the
LED display and the PLAY and CUSTOM PLAY
LEDs start flashing, indicating that you can re-record
the song.
2.
Press PLAY again to begin re-recording the song.
Re-recording starts from the beginning of the song and
replaces the previously recorded performance with the
newly recorded performance.
7
When you finish playing, press the STOP button.
After the small bars flash to draw a square on the
LED display to indicate the processing for stop, both
the RECORD and PLAY lamps go out, and recording
is stopped.
Be sure to remove the floppy disk from the disk drive
after the STOP lamp lights up.
N O T E :
When the available memory reaches “008” or less, the
numbers begin flashing to warn you. If this happens,
stop recording before the display reaches “000.”
8
To hear your newly recorded performance, press the
PLAY button.
Play back will begin after a couple of seconds. For
more information on playback and other playback-
related functions, see page 79.
Never attempt to press the eject button or turn the power
off during recording, reading and playing back. Doing
so can damage the disk and possibly the disk drive. Be
sure to remove the floppy disk from the disk drive before
turning off the power.