Utility Features
75
[UT 3] & [UT 4] Tone Generator
The Tone Generator pages determine the output settings for
the sounds of the built-in tone generator.
1
MasterTune
Determines the master pitch for the tone generator in
0.1-cent increments.
❏
Settings:
–102.4~+102.4
2
Vol
Determines the master volume for the tone generator.
❏
Settings:
0~127
n
If the value here is set too low, the overall volume may be too low —
even when setting the top panel sliders to the maximum position.
3
SwapL/R
Reverses the left and right positions of the drum voices. This
setting is related to the panning position of each drum voice
(page 50).
❏
Settings:
• off: Normal panning positions as specified for the drum voices.
• on: Reverse panning positions (the panning parameter for each
drum voice also works in reverse).
4
RevBypas
Temporarily enable or disable the system effects (both reverb
and chorus).
❏
Settings:
• off: System effects are enabled (normal).
• on: System effects are disabled.
5
IndivOut
Temporarily route the stereo-output drum voices to the
INDIVIDUAL OUTPUT jacks. This setting is related to the
output routing of each drum voice (page 53).
❏
Settings:
• manual: Normal output routings as specified for the drum
voices.
• auto: Drum voices routed to the stereo OUTPUT are grouped
into snare drum, bass drum, toms, hi-hats, cymbals, and other
instruments and respectively sent to INDIVIDUAL OUTPUT
jacks 1 to 6. Drum voices routed to InsFX go to insertion
effects, and are then sent to the outputs specified for insertion
effects.
6
Slider
Determines the control assignments for the panel sliders
(SNARE, KICK, TOM, HI-HAT, CYMBAL or MISC) while
the SHIFT button is held down.
❏
Settings:
• RevSend: Reverb send level for each drum voice.
• indiv: Output volume for each INDIVIDUAL OUTPUT 1 to
6.
n
If you’ve routed each drum voice to the stereo OUTPUT, there is no
reason to set Slider to indiv.
7
AuxIn
Determines the output routing of the audio signals coming in
from the AUX IN jack on the front panel.
❏
Settings:
• stereo: Sends to OUTPUT jack.
• phones: Sends to the PHONES jack.
• st+ph: Sends to both OUTPUT and PHONES jacks.
[UT 3] MasterTune Vol SwapL/R RevBypas
TG +000.0 127 off on
1
2
3
4
[UT 4] IndivOut Slider AuxIn
TG manual RevSend st+ph
5
6
7