Edit Section
47
[COMMON1] & [COMMON2]
Kit Common Settings
These two pages let you make basic settings for the drum kit
you are currently working (editing) with. For this reason,
some parameters are not directly related to trigger settings.
1
Volume
Determines the overall volume of the rhythm part including
the drum kit (MIDI channel 10).
❏
Settings:
0~127
n
This is the same as the volume setting for MIDI channel 10 (page
54).
2
WaveDir
This determines the directory on the memory card (page 86),
where wave samples or user voice data used together with this
drum kit are stored. The next time you select this drum kit,
those files will automatically be loaded. Make sure to insert
the appropriate memory card into the CARD slot; otherwise,
“No card” will be shown.
❏
Settings:
Directory name on a memory card
3
Song
This determines the song that is automatically called up when
you select this drum kit. Specify off to disable the automatic
selection of a song.
❏
Settings:
off, Preset or User song
4
Tempo
This determines the tempo that is automatically set when you
select this drum kit. Specify off to disable the automatic
tempo setting.
❏
Settings:
off, 30~300
5
9to10
If you set this parameter to on, trigger signals generated at
trigger input 9 (KICK) will be shared with trigger input 10.
Then, set trigger input 10 to play notes in an alternate mode
(for example, from a footswitch; no pad required). When you
play the bass drum in this case, you can have the phrase
automatically synchronized to a bass drum pattern assigned to
input 9.
❏
Settings:
off, on
6
11to12
If you set this parameter to on, trigger signals generated at
trigger input 11 will be shared with trigger input 12. (This is
used in the same way as
5
above.)
❏
Settings:
off, on
n
Trigger inputs 9/10 and 11/12 jacks are stereo pairs. However, you
can use them as four separate mono inputs if you connect four
mono pads using two Y-shaped cables and setting the above two
parameters
5
&
6
to off.
[KitName] Drum Kit Name
You can enter a name of up to 8 characters for the drum kit
you are now editing.
Use the second-to-left knob to move the entry position
(cursor) for each character. Then, use the center knob to
enter a character at that position. Repeat this step and specify
the drum kit name (maximum of eight characters).
❏
Available characters:
Once you’ve finished making the desired trigger
settings, store this drum kit (page 35).
[COMMON1] Volume WaveDir
127 No Card
1
2
[COMMON2] Song Tempo 9to10 11to12
P1 off off off
3
6
5
4
[KitName] Name "Acoustic"
<90abc>
! " # $ % & ’ ( ) *
,
. / 0 1 2 3
4 5 6 7 8 9 : ; <
> ? @ A B C D E F G
H I J K L M N O P Q R S T U V
X Y Z [
¥ ] ^ _
`
a b c d e f g h i j k l m n o
p q r s t u v w x y z { | }
→ ←
=
W
+
-
