Yamaha DTXTREME III, Руководство пользователя

Страница: 128 / 160

Utility Mode [UTILITY]
Reference
128 DTXTREME III Owner’s Manual
1
Switch
Determines whether Master Effect is applied or not to the
entire sound of the DTXTREME III.
B Type
Determines the Master Effect type.
C
Pre
You can set various parameters in order to change how the
sound is affected by the selected Effect type. This parameter
lets you call up the pre-programmed settings of these effect
parameters. Data List booklet for information on the parame-
ters for each Effect preset.
D
Effect parameter
The number of parameters and values available differs
depending on the currently selected effect type. Refer to page
72 for details about the Effect parameters. Refer to the sepa-
rate Data List booklet for information on the parameters for
each Effect type.
E PAGE
> > > >
This appears when another page can be called up from the
current page. Use the Cursor [
M M
M M
] or [
N N
N N
] button to call up
another page.
External Audio Settings
[F4] AUXIN
You can set parameters related to audio signals input via the AUX IN/SAMPLING IN jack.
From this display, you can set parameters such as volume
and pan of the audio signals input via the AUX IN/SAM-
PLING IN jack. These parameters are useful, for example,
when playing or practicing along with a CD or other source
connected to the AUX IN/SAMPLING IN jack.
1
Volume
Determines the output level of the audio signals input via the
AUX IN/SAMPLING IN jack.
B Pan
Determines the stereo pan position of the audio signals input
via the AUX IN/SAMPLING IN jack.
C Mono/Stereo
Determines the signal configuration for the audio signals
input via the AUX IN/SAMPLING IN jack, or how the signal
or signals are routed (stereo or mono).
L mono Only the L channel of the audio input is used.
R mono Only the R channel of the audio input is used.
L+Rmono The L and R channels of the audio input are
mixed and processed in mono.
Stereo Both the L and R channels of the audio input
are used.
D OutputSel
Determines the output jack assignment for the audio signals
input via the AUX IN/SAMPLING IN jack.
E Mic/Line
When using the AUX IN/SAMPLING IN jacks, this deter-
mines the input source, microphone (mic) or line.
mic Intended for low output equipment, such as a
microphone, electric guitar or bass.
line Intended for high output equipment, such as a
keyboard, synthesizer, or CD player.
Master Effect Settings
[SF2] MEF
Settings off, on
Settings
Details about the Effect types are described
on page 70.
1
3
5 2 4
Output Settings
[SF1] OUTPUT
Range 0 – 127
Range L63 (far left) – C (center) – R63 (far right)
Settings L mono, R mono, L+Rmono, stereo
1 2 3 4 5
Settings See the table below.
LCD Output jacks Stereo/Mono
L&R+ph OUTPUT L/R and PHONES Stereo
Phones PHONES Stereo
L&R OUTPUT L/R Stereo
Ind1&2 INDIVIDUAL OUTPUT 1 and 2 Stereo (1: L, 2: R)
Ind3&4 INDIVIDUAL OUTPUT 3 and 4 Stereo (3: L, 4: R)
Ind5&6 INDIVIDUAL OUTPUT 5 and 6 Stereo (5: L, 6: R)
Ind1 INDIVIDUAL OUTPUT 1 Mono
: : :
Ind6 INDIVIDUAL OUTPUT 6 Mono
Settings mic, line
Ref
erence
Dr
um Kit mode
Song mode
Clic
k mode
T
rigger mode
File mode
Utility mode
Chain mode
Sampling mode