Yamaha Disklavier Mark III Series, Руководство по продвинутой эксплуатации

Страница: 39 / 39

35
English Chapter 6: Recor
ding L/R Songs
Once you begin recording your song,
subsequent sustain pedal presses will not be
recorded as count-in beats.
Playback with a Pedal
Count-In
When a song recorded with a pedal count-in is
played back, you can set the count-in to precede
the song. Specifically, the metronome beeps and
the LED volume indicators flash to indicate the
count-in beats. As the default setting is “OFF”,
you need to set it to “ON” when you want the
count-in to be played back.
1
Press [METRONOME], and then
[
>
] until the following display
appears.
2
Press [+/YES] to set the Pedal
Count parameter to ON.
3
Press [METRONOME] to return to
the normal display.
4
Press [PLAY/PAUSE] to begin
playback.
The metronome starts and the LED volume
indicators flash to show the count-in beat.