Yamaha Disklavier Mark III Series, Руководство по продвинутой эксплуатации

Страница: 15 / 39

11
English Chapter 2: Chain Play — Playing Back Memor
y Disks in a Gr
oup
In the above display, “A” is selected.
Therefore, playback begins from disk A and
continues to the end of disk F, then stops.
Disks are played back from left to right in
the display. The chain will not repeat
unless the “All Repeat” setting is made (see
Chapter 7 “Repeat Playback” in the
Basic
Operation Manual for details). Disks
represented by “x” and “_” are skipped.
3
Press [PLAY/PAUSE] to begin
Chain Play from the specified disk.
You can also press [ENTER] or [STOP] to
engage Standby mode.
When playback of the last song on the
selected disk finishes, the next disk in the
group that contains songs is automatically
played back.
Canceling Group
Functions
You can choose to manage your disks in disk units
instead of group units by setting Memory Disk
Chain Play to OFF and selecting a target disk in
the Memory Disk selection display. For example,
if you want to play disk 7 only, you should set
Memory Disk Chain Play to OFF, and select disk
7 using the [SELECT] buttons.
1
Hold down [FUNC.] and press
[STANDBY / ON].
The setup menu appears.
2
Press [
>
] to move the
c
cursor to
the Chain Play option, then press
[ENTER].
A display similar to the following appears.
3
Press [–/NO] or [+/YES] until OFF
appears.
4
Press [ENTER].
The group is switched off, and the display
returns to the setup menu.