En
130
■
Volume
Setting the volume.
Max Volume
Sets the limit value of the volume.
Setting range
-60.0 dB to +15.0 dB (5.0 dB increments), +16.5 dB [20.5 to 95.5 (5.0 increments), 97.0]
Initial Volume
Sets the initial volume when the receiver is turned on.
Settings
■
Pure Direct Mode
Selects whether to output video signals during the Pure Direct mode (p.71).
Settings
■
Adaptive DSP Level
Selects whether to automatically adjust the CINEMA DSP effect level.
Settings
■
Virtual Speaker
Setting Virtual Speaker.
VPS
Selects whether to create Virtual Presence Speaker (VPS) using the front, center, and surround
speakers. When VPS is enabled, the unit creates front VPS when no front presence speakers are
connected, and creates rear VPS when front presence speakers are connected but no rear
presence speakers (p.66).
Settings
X
Depending on the installation height of the surround speakers, VPS may not be effective. In this case, set “Virtual
Presence Speaker” to “Off”.
VSBS
Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers.
When VSBS is enabled, the unit creates VSBS when no surround back speakers are connected.
Settings
X
VSBS is effective only when 6.1- or 7.1-channel content is played back.
Off
Sets the level to the volume level of the unit when it last entered standby mode.
On
Sets at Mute or the specified volume level (-80.0 dB to +16.5 dB, 0.5 dB increments)
[0.5 to 97.0 (0.5 increments)].
(Specify a volume level which is lower than the “Max Volume” setting.)
Auto
Automatically outputs video signals when any videos are input from the selected
input source or an input source that can be operated with the on-screen display is
selected. When no video signals are input, the wall paper is displayed.
Video Off
Does not output video signals including the wall paper.
Off
Does not adjust the effect level automatically.
On
Adjusts the effect level automatically according to the YPAO measurement results
and the volume level.
Off
Disables Virtual Presence Speaker (VPS).
On
Enables Virtual Presence Speaker (VPS).
Off
Disables Virtual Surround Back Speaker (VSBS).
On
Enables Virtual Surround Back Speaker (VSBS).