32
5.2. Loading a Disc
1. Press the Eject button on your CRW2100SXZ or CRW2100FXZ drive’s front panel.
2. Place the disc onto the tray with its label or printing facing upward.
3. Press the Eject button to close the tray.
Important Note
: When a disc is loaded, the ON/DISC LED is lit up in orange first, then changes
to green.
Important Note
: Do not push or pull the tray using excessive force. Doing so can damage the
drive or the disc. Instead, always use the Eject button to open or close the tray
.
5.3. Ejecting the Disc
1. Press the Eject button on the CRW2100SXZ or CRW2100FXZ drive’s front panel.
2. Remove the disc from the tray.
3. Press the Eject button to close the tray.
Importanat Note
: It may not be possible to eject the disc tray while a disc is being read or in
other situations.
Importanat Note
: Only remove the disc after the disc tray has opened fully. Otherwise, you risk
damaging the drive or the disc.
1
2
1
2
