CVP-809/CVP-805 Owner’s Manual
107
10
C
on
n
ec
tio
n
s –
U
sin
g
Y
our
In
str
umen
t w
ith
O
th
er
D
ev
ices
–
You can connect a stereo system to amplify the instrument’s sound by using the AUX OUT [L/L+R]/[R]
jacks. The microphone or guitar sound connected to the instrument’s [MIC/LINE IN] jack is output at the
same time.
NOTICE
• To avoid possible dama
g
e, first turn on the power to the instrument, then to the external device. When turnin
g
off the power,
first turn off the power to the external device, then to the instrument. Since this instrument’s power may automatically be
turned off due to the Auto Power Off function (pa
e 19), turn off the power to the external device, or disable Auto Power Off
when you do not intend to operate the instrument.
• Do not route the output from the AUX OUT jacks to the [AUX IN] jacks. If you make this connection, the si
g
nal input at the [AUX
IN] jacks is output from the AUX OUT jacks. These connections could result in a feedback loop that will make normal
performance impossible, and may even dama
g
e the e
q
uipment.
NOTE
• Use audio cables and adaptor plugs having no (zero) resistance.
• Use only the [L/L+R] jack for connection with a monaural device.
• Use an appropriate adaptor plug if the input jack of the powered speaker does not match the phone plug of the audio cable.
• When you are monitoring the sound output via the AUX OUT jacks from headphones connected to the instrument, we recommend that
you set the Binaural Sampling and Stereophonic Optimizer functions to off. For details, refer to page 21.
Using an External Speaker System for Playback (AUX OUT [L/L+R]/[R] jacks)
Instr
u
ment
Po
w
ered speaker
A
u
dio ca
b
le
A
u
dio signal
Standard phone
pl
u
g (1/4")
Standard phone
pl
u
g (1/4")
Inp
u
t jack