CVP-809/CVP-805 Owner’s Manual
19
Sta
rting
U
p
1
Turn down the [MASTER VOLUME] dial to “MIN.”
2
Press the [
P
] (Standby/On) switch to turn the power on.
The [MIC] lamp located at right of the [MASTER VOLUME] dial and the
display light up. After a while, the Home display (page 26) is shown and the
instrument starts up. Adjust the volume as desired while playing the keyboard.
NOTE
Before the Home display is shown, no sound is emitted when the keys are pressed. Moreover, the power does not turn off
even when the [
P
] (Standby/On) switch is pressed in this condition.
3
Press and hold the [
P
] (Standby/On) switch for about a second to turn the power
off.
CAUTION
Even when the [
P
] (Standby/On) switch is in standby status, electricity is still flowin
g
to the instrument at the
minimum level. Remove the electric plu
g
from the outlet when the instrument is not to be used for extended
periods of time, or durin
g
electrical storms.
NOTICE
While recordin
g
or editin
g
, or while a messa
g
e is displayed, the power cannot be turned off even if you press the
[
P
] (Standby/On) switch. If you want to turn off the power, press the [
P
] (Standby/On) switch after recordin
g
,
editin
g
, or after the messa
g
e has disappeared. If you need to force-
q
uit the instrument, hold down the
[
P
] (Standby/On) switch for lon
g
er than three seconds. Note that the force-
q
uit operation mi
g
ht cause data loss
and dama
g
e to the instrument.
Auto Power Off function
To prevent unnecessary power consumption, this instrument features an Auto Power Off function that
automatically turns the power off if the instrument is not operated for a specified period of time. The
amount of time that elapses before the power is automatically turned off is approximately 30 minutes by
default; however, you can change the setting (page 22).
NOTICE
Any data which is not saved via the Save operation will be lost if the power automatically turns off. Make sure to save
your data before this happens.
Turning the Power On/Off
Disabling Auto Power Off (simple method)
Turn the power on while holding down the lowest key on the keyboard. An “Auto power off disabled” message
appears briefly and Auto Power Off is disabled.
+
A-1