CVP-601 Owner’s Manual
28
Sta
rting
U
p
The instructions that follow show you how to enter characters for naming your files/
folders, inputting keywords, etc. Entering characters is done in the display shown below.
1
Change the type of character by pressing the [1
] button.
If you select a language other than Japanese as the Language (page 18), the
following different types of characters are available:
•
CASE
.............. Capital letters, numbers, marks
•
case
................. Lowercase letters, numbers, marks
If you select Japanese as the Language (page 18), the following different types of
characters and sizes can be entered:
2
Use the [DATA ENTRY] dial to move the cursor to the desired
position.
3
Press the [2
] – [6
] and [7
] buttons, corresponding to the
character you wish to enter.
To actually enter the selected character, move the cursor or press another letter-
input button. Alternately, you can wait for a short time and the character will be
entered automatically.
For details on entering characters, refer to “Other character-entry operations”
below.
4
Press the [8
] (OK) button to actually enter the new name and
return to the previous display.
Entering Characters
1
4
2
3
NOTE
Depending on the display for
character entry you are working
in, some types of characters
cannot be entered.
(kana-kan)
......... Hiragana and Kanji, marks (full size)
(kana)
................. Katakana (normal size), marks (full size)
(kana)
................. Katakana (half size), marks (half size)
............................. Alphabet (capital and small letters, full size),
numbers (full size), marks (full size)
............................. Alphabet (capital and small letters, half size),
numbers (half size), marks (half size)
•
•
•
•
•
NOTE
The file name can contain up to
41 characters and the folder
name can contain up to 50
characters.
NOTE
To cancel the character-entering
operation, press the [8
]
(CANCEL) button.
Содержание Clavinova CVP-601
Страница 113: ...CVP 601 Owner s Manual 113 ...
