N1
Owner’s Manual
•
23
Recording your Performance
This instrument’s recording function enables you to record your performance. Follow the steps below to record and
play back your performance.
1
Select a voice for the recording.
While holding down the [PIANO/VOICE] button, press the [+] or [-] button to
select the desired voice (page 15). Use the [MASTER VOLUME] control to
adjust the volume to a comfortable listening level.
2
Engage the Record mode.
Press the [RECORD] button.
The [RECORD] button indicator lights up steadily, and the [PLAY/STOP] but-
ton indicator flashes.
Press the [RECORD] button again if you wish to cancel Record mode.
NOTICE
After you’ve recorded a performance on this instrument, starting to record another perfor-
mance will automatically erase the previously recorded data.
Audio recording and data recording
Cassette tape recordings use a different data format than this instrument. Cassette tapes record audio signals. On the
other hand, this instrument records information about the notes and voices being played and about the timing and
tempo of those notes. It does not record audio signals. When you play back a recorded performance on this instru-
ment, its internal tone generator reproduces the sound according to the recorded information.
3, 4, 5
2
1
You can also use the [MASTER VOLUME]
control to adjust the volume level during
playback.
You cannot engage the Record mode while
another song, such as a demo song, is
playing.
This instrument’s internal memory allows
the recording of one song (300KB; approx.
3,000 notes).
The recorded song data is retained even
when the power is turned off.
The recorded song to the instrument can be
saved to USB flash memory (page 25).
When a USB flash memory device is con-
nected to the instrument, the performance
is recorded to the USB flash memory
directly.
If there is not enough recording capacity
left, or if the files U00–U99 already exist in
the USB flash memory, “
FUL
” will appear
on the display and the Record mode cannot
be engaged.
Before using a USB flash memory device,
be sure to read “Precautions when using
the USB [TO DEVICE] terminal” on page 26.
Flashes
Lights up
