N1
Owner’s Manual
•
29
Formatting USB Flash Memory
Certain USB flash memory devices may require formatting before they can be used by this instrument. Before
using a USB flash memory device, be sure to read “Precautions when using the USB [TO DEVICE] terminal” on
NOTICE
If you format a USB flash memory that already contains data, all of the data will be erased. Be
careful not to erase important data when using the format function.
1
Engage the Format mode.
After connecting the USB flash memory device to be formatted to the instru-
ment, press the [RECORD] button while holding the [FUNCTION] button.
The message “
For
” (Format) appears on the display.
2
Start Formatting.
After pressing the [PLAY/STOP] button, a “
n Y
” message appears on the dis-
play. Press the [+] button to execute the formatting operation. Press the [-] button
to cancel formatting.
When the formatting is finished, “
End
” appears on the display for three sec-
onds.
NOTICE
Do not turn off the power to the instrument or disconnect the USB flash memory device,
while the instrument is formatting the USB device (while “- - -“ is displayed ). Doing so
may damage the data or the USB flash memory itself.
3
Exit from the Format mode.
Press any one of the buttons.
2
1
For
