•
The accompaniment and/or rhythm suddenly stops when releasing
keys on the Lower keyboard or Pedalboard.
Depending on the A.B.C. mode and Memory settings, you can stop the accompaniment
and/or rhythm by releasing the keys. (See page 60.)
•
While an Intro or Ending pattern is automatically playing, the Lower
Keyboard does not produce any sound, even when the keys are played.
Since the Accompaniment chords play automatically one after another, the Lower
Keyboard Voices are designed not to sound during the playback of an Intro or Ending
pattern.
•
The Fill In doesn’t play properly.
Make sure to press the FILL TO A or FILL TO B buttons precisely at the point you wish
the Fill In to begin. If you press the button too late, only part of the Fill In may play, or
it may not play at all.
•
The pitch in the Single Finger mode does not change, even when
pressing different keys of the keyboard.
Single Finger mode will only produce notes when played within a fixed octave interval
on the Lower Keyboard. If notes with the same letter name are pressed outside of that
range, the chords that are sounded will share the same pitch.
•
The harmony notes of the Melody On Chord function cannot be heard.
The Upper Keyboard has been set to sound only Lead Voices. Make sure that one of the
Upper Keyboard Voice sections (1, 2 or Organ) has been turned on and that the volume
setting is appropriate.
EFFECTS
•
The Tremolo, Symphonic/Celeste, Flanger, and Delay effects cannot be
heard, even when they are turned on in the Voice Condition page.
Make sure that the corresponding effects are set to appropriate values in the EFFECT SET
pages. (See page 37.)
•
The Tremolo, Symphonic/Celeste, Flanger, and Delay effects cannot be
heard, even when they are set in Effect Set.
Effects must be turned on in the Voice Condition page. (See page 34.)
•
The Tremolo effect cannot be heard, even when the TREMOLO (FAST)
button.
Tremolo must be selected first in the Voice Condition display (for panel Voices), or in
the FLUTE VOICE or EXTRA VOICE pages (for the Flute/Tibia and Extra Voice sections).
(See pages 28, 31, 34.)
•
The Pan function does not operate.
The Pan function can only be used if all other effects in the Voice Condition page are set
to off. (See page 34.)
•
The Reverb effect does not operate, even when Reverb parameters are
increased.
Increase the Reverb on the panel Reverb touch control, or increase the Reverb Depth in
the REVERB page.
•
Sustain has no effect on the Lead Voices.
This is normal; Sustain cannot be applied to the Lead Voices.
167
AR100E-14* 8/21/97 10:17 PM ページ 167
Содержание Artiste AR-80 Electone
Страница 1: ...AR 80 ...