111
5.
Select “COPY OK” in the display by pressing the appropriate Data Control
button.
6.
To actually execute the operation, select “OK” at the prompt, or select
“CANCEL” to abort the operation.
When the song has been completely copied, the display returns to the original UTILITY page.
Song Delete
Song Delete allows you to delete or erase a selected song on disk.
To use Song Delete:
1.
Call up the UTILITY page by pressing the appropriate Menu button.
2.
Select the song number to be deleted by using the SONG SELECT buttons
or the SONG SELECT controls in the display.
3.
Select “SONG DELETE” in the display by pressing the appropriate Data
Control button.
4.
To delete the selected song, select “OK” at the prompt, or select “CANCEL”
to abort the operation.
When the song has been deleted, the display returns to the original UTILITY page.
Disk Copy
Disk Copy allows you to duplicate the contents on one floppy disk to another. Yamaha
recommends that you keep copies of your important data on two separate floppy disks by using
this function.
1.
Have handy the source disk and a formatted blank disk to which you wish
to copy the data.
The source disk and destination disk must be indentical in type. For example, if the source disk
is a 2DD disk, use only a 2DD disk for the destination disk. For instructions on formatting a
blank disk, see page 85.
Be sure to set the Write-protect tab on the source disk to ON. The destination disk, on the other
hand, must be set to OFF. If you attempt to copy the disk when the write-protect tab is set to
“on” position, a “Disk write protected!” or “Disk error!” message appears in the display,
indicating that the operation is not possible. (Select “OK” at the prompt, and change the tab
setting, if you wish to copy to the disk.)
AR-80E-7-M.D.R* 8/21/97 10:11 PM ページ 111
Содержание Artiste AR-80 Electone
Страница 1: ...AR 80 ...
