manualshive.com logo in svg

Yamaha A4000, Руководство пользователя

Поделиться
Скачать
Yamaha A4000 Скачать руководство пользователя страница 186

7. DISK COMMANDS

186

Chapter 7 DISK Mode 

• A5000/A4000

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 

Knob 4

[

Turn] Disk

Selects the disk from which the OS file is to be loaded.

[Range] All connected/mounted MS-DOS format hard

disks and floppy disks, and ISO9660 format CD-

ROM disks.

• If the OS file is stored in the disk’s root directory the

OS information will appear on the display.

• OS files stored in any directory other than the root

directory will not be recognized.

• If a connected SCSI or IDE device (hard disk, ZIP

drive, etc.) cannot be selected, go to the disk select
display (DISK-DISK-Disk) and check the mount/
unmount status and SCSI ID settings of the device
(page 173).

Knob 5

[

Press] EXEC&CONT (Execute & Continue)

Press this knob to call the OS load confirmation display.
Press Knob 5 (YES) to actually execute the OS load
operation.

• The LOAD OS operation cannot be executed if the

OS file information does not appear on the display.

Содержание A4000









































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды