manualshive.com logo in svg

Yamaha A4000, Руководство пользователя

Поделиться
Скачать
Yamaha A4000 Скачать руководство пользователя страница 164

RECORDING-MONITOR

164

Chapter 6 RECORD Mode 

• A5000/A4000

 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● 

Knob 5

[

Turn] Click on/off

Set this on if you want to output the click sound. If the set-
ting is on, the A5000/A4000 continues to generate the
click while you are working in RECORDING mode.

[Range] off, on

• If the setting is on, the A5000/A4000 will include click

information into the samples that you record. The
information is set into the sample’s parameter data,
and does not affect the waveform itself. You can later
use the click data as an aid when editing the sam-
ple’s waveform addresses.

• When click is turned on and a sample is recorded,

the specified tempo is automatically memorized as
the loop tempo for the sample. The loop tempo can
be used when specifying the sample's wave and/or
loop end addresses (page 120).

• Be careful if using the click while recording from a

microphone, since it is possible for the microphone to
pick up the click sound and record it into the wave-
form.

Содержание A4000









































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды