Yamaha A3000, Руководство пользователя

Страница: 55 / 376

Sample Editing
53
Chapter 2 Trying It Out
Chapter 2
Memo
Notice that you can use the AUDITION key in place of the MIDI keyboard to play out the sound of
your samples.
6.
Turn Knob 1 to select the
Config
(Configure) screen. Then turn Knob 3 to set
Zero
to
on
.
The zero feature (also known as automatic zeroing ) eliminates the cracking sound that
may occur when playback jumps from the loop endpoint to the loop start point.
▼
The screen now looks like this.
7.
Turn Knob 1 to select the
Loop
screen. Then turn Knob 4 to set
Step
to
×
1000
and turn Knob 2 as necessary to set
LpStart
(loop start point) to approximately
30000
.
8.
Turn Knob 3 as necessary to set
LpEnd
(loop endpoint) to approximately
45000
.
9.
Hold down the AUDITION key to check the editing results.
Adjust the start and endpoint values as necessary to further improve the sound of the
loop.
10.
Now play a key between C2 and B2 at your keyboard.
The key should produce the sound of the edited ahhh-hhh-hhh sample. The sound should
continue until the key is released.