Yamaha A3000, Руководство пользователя

Страница: 340 / 376

Effect parameter list
338
Appendix
4: NoisDly (NOISY MOD DELAY)
1 Dry/Wet Balance D63>W ~ D=W ~ D<W63 Balance between the dry sound and the effect sound
2 Mod Speed 0~127 Delay modulation frequency
3 Mod Wave Type typeA, typeB, typeC, typeD Modulation type
4 Mod Depth 0~127 Modulation depth
5 Delay Time 0.1~650.0ms Delay time
6 Feedback Level -63~+63 Feedback amount
7 Mod Mix Balance 1~127 Balance between delay sound and delay bypass sound
8 Hi Gain -12~+12dB Gain by which the EQ will boost/cut the high range
9 HPF Frequency Thru~8.0kHz Frequency at which the high pass filter will cut the low range
5: FlngPan (PLANGING PAN)
1 Dry/Wet Balance D63>W ~ D=W ~ D<W63 Balance between the dry sound and the effect sound
2 Flange&Pan Speed 0.00Hz~39.7Hz Delay modulation frequency
3 Flanger Depth 0~127 Delay modulation depth
4 Flanger Delay 0.1~180.0ms Delay time
5 Flanger Feedback -63~+63 Feedback amount
6 FlangPan Delay 0.1~180.0ms Delay time
7 FlangPan Feedback -63~+63 Feedback amount
8 HPF Frequency Thru~8.0kHz Frequency at which the high pass filter will cut the low range
9 LPF Frequency 1.0kHz~Thru Frequency at which the low pass filter will cut the high range
10 Delay Time 0.1~270.0ms Delay time
11 Delay Feedback -63~+63 Feedback amount
12 Delay Level 0~127 Delay level
13 AM Speed 0.00Hz~39.7Hz Frequency of amplitude modulation
14 AM Wave tri, sine, saw up, saw down Select amplitude modulation waveform
15 AM Depth 0~127 Amplitude modulation depth
16 AM Inverse R normal, inverse Invert left/right phase of amplitude modulation signal
6: FlowPan (FLOW PAN)
1 Dry/Wet Balance D63>W ~ D=W ~ D<W63 Balance between delay sound and effect sound
2 Delay Time 0.1~650.0ms Delay time
3 Delay Time Ofst R -884~0 Offset of R ch delay time
4 Feedback Level -63~+63 Feedback amount
5 FB Level Ofst R -63~+63 Offset of R ch feedback
6 Feedback Hi Damp 0.1~1.0 Adjust the high range attenuation (lower values will cause the high range to decay
faster)
7 FB Hi Damp Ofst R -0.9~+0.9 Offset of R ch high damp
8 Delay Mod Speed 0.00Hz~39.7Hz Delay modulation frequency
9 Delay Mod Depth 0~127 Delay modulation depth
10 Delay Dry/Wet 1~127 Balance between delay sound and effect sound
11 PreDelayPan Speed 0.00Hz~39.7Hz Frequency of the pre-delay autopan
12 PreDelayPan Wave tri, sine Waveform of the pre-delay autopan
13 PreDelayPan Depth 0~127 Depth of the pre-delay autopan
14 Auto Pan Speed 0.00Hz~39.7Hz Autopan frequency
15 Auto Pan Wave tri, sine Autopan waveform selection
16 Auto Pan Depth 0~127 Autopan depth
7: NoisAmb (NOISE AMBIENT)
1 Dry/Wet Balance D63>W ~ D=W ~ D<W63 Balance between dry sound and effect sound
2 Mod Speed 0~127 Modulation speed
3 Mod Depth 0~127 Modulation depth
4 Noise Level 0~127 Level of noise component
5 LPF Frequency 1.0kHz~Thru Frequency at which the low pass filter will cut the high range
6 Dry Mix Level 0~127 Pre-delay dry level
7 Delay Time 0.1~370.0ms Delay time
8 Delay Time Ofst R -884~0 Delay time offset for the R ch
9 Feedback Level -63~+63 Feedback amount
10 Delay Level 0~127 Delay level
11 AM Speed 0.00Hz~39.7Hz Modulation frequency
12 AM Wave tri, sine, saw up, saw down Modulation waveform selection
13 AM Depth 0~127 Depth of amplitude modulation
14 AM Inverse R normal, inverse Invert left/right phase of amplitude modulation signal