Yamaha A3000 Скачать руководство пользователя страница 325

Страница: 325 / 376

Installing an Internal Hard Disk

323

Appendix

Installing an Internal Hard Disk

This section explains how to install a standard SCSI hard disk drive (bare drive) into the
A3000.

Important

• Before performing the installation, please read precautions “Handling and Installa-

tion of Options,” found at the beginning of this manual.

• Consult your Yamaha dealer for information about hard disk models that have been

confirmed as operating correctly with the A3000.

Procedure

Be sure that you have the following at hand before starting the installation.

• A3000 main unit
• Internal SCSI hard disk
• Hard disk installation screws

Available from your hard disk dealer.

• Red/white cable (4-wire cable) supplied with the A3000. (power supply cable for the

hard disk)

• SCSI cable for the hard disk supplied with the A3000.
• Phillips screwdriver

Magnetic-tipped screwdriver is recommended.

• Screwdriver for the hard-disk installation screws.

Note that some hard-disk models do not use Phillips-head screws.

• Workbench

Please carry out all work on a stable workbench or table. Spreading a cloth over the
work surface will help prevent scratching.

• Gloves: Be sure to wear gloves so that your hands are not scratched by the metal

cover or other metal parts.

Содержание A3000

























































































































































































































































































































































































Результаты поиска

Содержание A3000

Отзывы:

Бренды по названию

Популярные бренды

Yamaha A3000, Руководство пользователя

Результаты поиска

Содержание A3000

Отзывы:

Бренды по названию

Популярные бренды