Yamaha A3000, Руководство пользователя

Страница: 169 / 376

167
Chapter 5 EDIT Mode
Chapter 5
TRIM/LOOP Function
If you push this knob while playing the sample with the AUDITION key or an external
keyboard, the loop start address automatically resets to the current playback location.
Knob 3
LpEnd
= loop start address,..., final address Realtime Set
• Sets the end point (loop-back point) of the loop.
• Note that actual loop handling depends on the loop-mode setting. (
☞
168).
• The
EndType
setting on the Configure page selects the units used to indicate the
address on the screen (
☞
161). If you set
EndType
to
beat
, the loop end address is
indicated by its distance, in beats, from the loop start address. The beat calculation is
determined by the
Tempo
setting that you make with Knob 4; see directly below.
If
EndType
(in the
Config
page)
≠
beat
:
Knob 4
Step
=
×
1
,...,
×
10000
• This knob selects the increment used for address adjustments made with Knobs 2
and 3. Specifically, the value that you set here determines the amount that the ad-
dress value changes when you turn Knob 2 or Knob 3 by a single click.
• The setting is identical to the
Step
setting on the
Wave
page (
☞
165). You can change
the value from either page.
• If the
EndType
parameter on the
Config
page (
☞
163) is set to
beat
, then this knob
operates differently, as described below.
If
EndType
(in the
Config
page) =
beat
:
Knob 4 Tempo =
80.00
,...,
159.99
Calculate Tempo
• This knob sets the tempo used to calculate the number of beats between the start
address and end address.
• The setting is identical to the
Tempo
setting on the
Wave
page (
☞
165). You can
change the value from either page.
• If you push the knob, the A3000 automatically calculates and displays the tempo
value for you, based on the assumption that the number of beats between the current
start and end addresses is 4 beats (or an even multiple or dividend of 4 beats).
• If the
EndType
parameter on the
Config
page (
☞
163) is set to a value other than
beat
,
then this knob operates differently, as described above.
Knob 5
LpMonitr
=
-500ms
,...,
0ms
Monitor Loop
Push this knob to monitor the sound of the loop. This feature lets you hear how the
sound of the loop changes as you edit the loop addresses.
The
LpMonitr
setting lets you start the monitored loop playback slightly ahead of the
loop start point. If you set the value to
-500ms
and then press the knob, for example, the
A3000 begins replay from a point 1/2 second before the loop start. (This lead-in is played
only once, and does not recur after the loop is entered.)