manualshive.com logo in svg

Yamaha 6X9 DIGITAL ELECTRONIC CONTROL, Руководство по эксплуатации

Yamaha 6X9 DIGITAL ELECTRONIC CONTROL - это передовой продукт с дополнительными функциями. Для подробной информации по использованию, загрузите бесплатное руководство по эксплуатации с manualshive.com. Получите доступ к полному руководству пользователя для удобства в использовании.

Поделиться
Скачать
background image

Information required by radio laws

23

Information required by radio laws

1.

USA (FCC), Canada (ISED)

FCC CAUTION

Changes or modifications not expressly approved by the party responsible for compliance could
void the operator’s authority to operate the equipment.

FCC/ISED

This device complies with part 15 of FCC Rules and Innovation, Science and Economic Develop-
ment Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Le présent appareil est conforme à la partie 15 des règles de la FCC et aux normes des CNR
d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio
exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit
pas produire de brouillage, et (2) l’appareil doit accepter tout brouillage subi, même si le brouillage
est susceptible d’en compromettre le fonctionnement.

2.

EC RE Directive

[EN]
English

Hereby, MITSUBISHI ELECTRIC CORPORATION,
HIMEJI WORKS, declares that the radio equipment
type Smart Keyless System (SKESAE-01,SKESAE-
02) is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is
available at the following internet address:
http://www.mitsubishielectric.com/bu/automotive/
doc/re.html

[FR]
French

Le soussigné, MITSUBISHI ELECTRIC CORPO-
RATION, HIMEJI WORKS, dé clare que l’équipe-
ment radioélectrique du type Smart Keyless System
(SKESAE-01,SKESAE-02) est conforme à la direc-
tive 2014/53/UE.
Le texte complet de la déclaration UE de conformité
est disponible à l’adresse internet suivante:
http://www.mitsubishielectric.com/bu/automotive/
doc/re.html

[IT]
Italian

Il fabbricante, MITSUBISHI ELECTRIC CORPORA-
TION, HIMEJI WORKS, dichiara che il tipo di appa-
recchiatura radio Smart Keyless System (SKESAE-
01,SKESAE-02) è conforme alla direttiva 2014/53/
UE.
Il testo completo della dichiarazione di conformità
UE è disponibile al seguente indirizzo Internet:
http://www.mitsubishielectric.com/bu/automotive/
doc/re.html

[DE]
German

Hiermit erklärt MITSUBISHI ELECTRIC CORPO-
RATION, HIMEJI WORKS, dass der Funkanlagen-
typ Smart Keyless System (SKESAE-01,SKESAE-
02) der Richtlinie 2014/53/EU entspricht.
Der vollständige Text der EU-Konformitätserklä-
rung ist unter der folgenden Internetadresse verfüg-
bar: 
http://www.mitsubishielectric.com/bu/automotive/
doc/re.html

[ES]
Spanish

Por la presente, MITSUBISHI ELECTRIC CORPO-
RATION, HIMEJI WORKS declara que el tipo de
equipo radioeléctrico Smart Keyless System (SKE-
SAE-01,SKESAE-02) es conforme con la Directiva
2014/53/UE.
El texto completo de la declaración UE de conformi-
dad está disponible en la dirección Internet
siguiente: 
http://www.mitsubishielectric.com/bu/automotive/
doc/re.html

[SV]
Swedish

Härmed försäkrar MITSUBISHI ELECTRIC COR-
PORATION, HIMEJI WORKS att denna typ av
radioutrustning Smart Keyless System (SKESAE-
01,SKESAE-02) överensstämmer med direktiv
2014/53/EU.
Den fullständiga texten till EU-försäkran om över-
ensstämmelse finns på följande webbadress:
http://www.mitsubishielectric.com/bu/automotive/
doc/re.html

[MT]
Maltese

B’dan, MITSUBISHI ELECTRIC CORPORATION,

HIMEJI WORKS, niddikjara li dan it-tip ta’ tag

ħ

mir

tar-radju Smart Keyless System (SKE47E-

01,SKE47E-02) huwa konformi mad-Direttiva 2014/

53/UE.

It-test kollu tad-dikjarazzjoni ta’ konformità tal-UE

huwa disponibbli f’dan l- indirizz tal-Internet li 

ġ

ej:

http://www.mitsubishielectric.com/bu/automotive/

doc/re.html

[FI]
Finnish

MITSUBISHI ELECTRIC CORPORATION, HIMEJI
WORKS vakuuttaa, että radiolaitetyyppi Smart Key-
less System (SKESAE-01,SKESAE-02) on direk-
tiivin 2014/53/EU mukainen.
EU-vaatimustenmukaisuusvakuutuksen täysimit-
tainen teksti on saatavilla seuraavassa interneto-
soitteessa: 
http://www.mitsubishielectric.com/bu/automotive/
doc/re.html

[NL]
Dutch

Hierbij verklaar ik, MITSUBISHI ELECTRIC COR-
PORATION, HIMEJI WORKS, dat het type radioap-
paratuur Smart Keyless System (SKESAE-
01,SKESAE-02) conform is met Richtlijn 2014/53/
EU.
De volledige tekst van de EU-conformiteitsverklar-
ing kan worden geraadpleegd op het volgende
internetadres: 
http://www.mitsubishielectric.com/bu/automotive/
doc/re.html

[PT]
Portuguese

O abaixo assinado MITSUBISHI ELECTRIC COR-
PORATION, HIMEJI WORKS declara que o pre-
sente tipo de equipamento de rádio Smart Keyless
System (SKESAE-01,SKESAE-02) está em confor-
midade com a Diretiva 2014/53/UE. 
O texto integral da declaração de conformidade
está disponível no seguinte endereço de Internet:
http://www.mitsubishielectric.com/bu/automotive/
doc/re.html

DEC_OM(QUINT)_EN.book  23 ページ  ２０２１年６月２５日　金曜日　午前９時１６分

Downloaded from 

ManualsNet.com

 search engine

Содержание 6X9 DIGITAL ELECTRONIC CONTROL























































































Отзывы:

Нет отзывов

Похожие инструкции для 6X9 DIGITAL ELECTRONIC CONTROL

Faytech FAY-002 Quick Manual preview
FAY-002
Бренд: Faytech Страницы: 2
Analog Devices ADSP-BF518F EZ-Board Manual preview
ADSP-BF518F EZ-Board
Бренд: Analog Devices Страницы: 111
Biostar N68S3B Setup Manual preview
N68S3B
Бренд: Biostar Страницы: 47
Renesas RTKA223012DR0050BU Manual preview
RTKA223012DR0050BU
Бренд: Renesas Страницы: 14
AKM AKD4556-B Manual preview
AKD4556-B
Бренд: AKM Страницы: 45
WIN Enterprises MB-73440 User Manual preview
MB-73440
Бренд: WIN Enterprises Страницы: 82
MSI MS-7364 Instruction Manual preview
MS-7364
Бренд: MSI Страницы: 91
Aaeon HSB-835A User Manual preview
HSB-835A
Бренд: Aaeon Страницы: 50
Biostar TA970 Setup Manual preview
TA970
Бренд: Biostar Страницы: 51
Fujitsu Siemens Computers D1421 Technical Manual preview
D1421
Бренд: Fujitsu Siemens Computers Страницы: 20
Gigabyte GA-AB350M-D3H User Manual preview
GA-AB350M-D3H
Бренд: Gigabyte Страницы: 40
Intel DQ45CB - Desktop Board Executive Series Motherboard Technical Product Specification preview
DQ45CB - Desktop Board Executive Series Motherboard
Бренд: Intel Страницы: 96
IDT 8A 72QFN Series User Manual preview
8A 72QFN Series
Бренд: IDT Страницы: 29
OLIMEX ESP8266 Series Upgrade Manual preview
ESP8266 Series
Бренд: OLIMEX Страницы: 17
Gigabyte GA-7ZM User Manual preview
GA-7ZM
Бренд: Gigabyte Страницы: 72
Fujitsu D1170 Technical Manual preview
D1170
Бренд: Fujitsu Страницы: 22
Fujitsu D1031 Technical Manual preview
D1031
Бренд: Fujitsu Страницы: 23
Fujitsu D1483 Tehnical Manual preview
D1483
Бренд: Fujitsu Страницы: 28

Бренды по названию

Популярные бренды

Загрузить еще бренды