Smart key settings
13
Changing the password
You can add a new key fob or change the password to unlock the system if the smart key is lost.
TIP:
• The procedure to change the password in “How to set (how to enter setting mode)”, and when the
recognition succeeded beep sounds, move to “How to set (how to set passwords)”.
• If you change the password, the factory default that is provided is disabled.
How to set (how to enter setting mode)
1.
Use the key fob to lock the system. (The lock indicator turns on)
2.
Press the POWER switch repeatedly on and off three times. After that, a beep sounds two
times.
How to set (how to set passwords)
1.
Repeat steps 1 and 2 three times.
2.
The password input mode activates and a beep sounds.
3.
Press the POWER switch once to start the password beep.
4.
Set the first digit “
” of the password.
Press the POWER switch, while the beep is beeping, when it reaches the number of beeps that
is equal to the number you want for this digit of your password.
How the beep sounds:
_
_
_
_
_
_
_
_
_
ON
OFF
Beep
Long press for more than
3 seconds
Release for more than
3 seconds
Recognition succeeded
Number of beeps
When recognition succeeds
DEC_OM(QUINT)_EN.book 13 ページ ２０２１年６月２５日 金曜日 午前９時１６分
Downloaded from
