Yamaha 30DMH Скачать руководство пользователя | Manualshive

Страница: 19 / 66

background image

Components

14

EMU25961

Throttle indicator

The fuel consumption curve on the throttle
indicator shows the relative amount of fuel
consumed for each throttle position. Choose
the setting that offers the best performance
and fuel economy for the desired operation.

EMU25973

Throttle friction adjuster

A friction device provides adjustable resis-
tance to movement of the throttle grip or the
remote control lever, and can be set accord-
ing to operator preference.
To increase resistance, turn the adjuster
clockwise.

WARNING! Do not overtighten

the friction adjuster. If there is too much
resistance, it could be difficult to move
the remote control lever or throttle grip,
which could result in an accident.

[EWM00032]

To decrease resistance, turn the adjuster
counterclockwise.

When constant speed is desired, tighten the
adjuster to maintain the desired throttle set-
ting.

EMU25993

Engine shut-off cord (lanyard) and
clip

The clip must be attached to the engine shut-
off switch for the engine to run. The cord
should be attached to a secure place on the
operator’s clothing, or arm or leg. Should the
operator fall overboard or leave the helm, the
cord will pull out the clip, stopping ignition to
the engine. This will prevent the boat from
running away under power.

WARNING! At-

tach the engine shut-off cord to a secure
place on your clothing, or your arm or leg
while operating. Do not attach the cord to
clothing that could tear loose. Do not
route the cord where it could become en-
tangled, preventing it from functioning.
Avoid accidentally pulling the cord dur-
ing normal operation. Loss of engine
power means the loss of most steering
control. Also, without engine power, the
boat could slow rapidly. This could cause
people and objects in the boat to be
thrown forward.

[EWM00122]

1. Throttle indicator

ZMU02848

ZMU02849

1

ZMU03688

«
...
17
18
19
20
21
...
»

Содержание 30DMH



































































Отзывы:

Нет отзывов

Похожие инструкции для 30DMH

Бренд: ASROCK Страницы: 138

Бренд: Aaeon Страницы: 65

Бренд: Embest Страницы: 91

Бренд: Texas Instruments Страницы: 16

Бренд: Zetex Страницы: 8

Бренд: IEI Technology Страницы: 131

Бренд: IBASE Technology Страницы: 84

Бренд: MINATO Страницы: 125

Бренд: Maxim Страницы: 7

Бренд: QDI Страницы: 58

Бренд: trimond Страницы: 43

Бренд: Foxconn Страницы: 108

Бренд: Texas Instruments Страницы: 24

Бренд: Pericom Страницы: 8

Бренд: SOLTEK Страницы: 94

Бренд: Portwell Страницы: 9

Бренд: NXP Semiconductors Страницы: 35

Бренд: NXP Semiconductors Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды