Control function operation
33
There are three switches on the battery
switch assembly: the “START” switch,
“HOUSE” switch, and “EMERG PARALLEL”
switch.
1
“HOUSE” switch (red)
2
“EMERG PARALLEL” switch (yellow)
3
“START” switch (red)
1
ON position (green)
2
OFF position (red)
In normal operation, keep the “START” and
“HOUSE” switches in the ON position. Keep
the “EMERG PARALLEL” switch in the OFF
position. This setting allows both batteries to
be charged automatically while the engines
are running.
NOTICE:
Do not turn the
“HOUSE” switch to the OFF position if the
boat is moored in the water as it will pre-
vent the anchor light from functioning.
If the start battery is discharged, turn the
“EMERG PARALLEL” switch to the ON posi-
tion to start the engines. Once the engines
are started or the start battery is charged,
turn the “EMERG PARALLEL” switch to the
OFF position.
Main switch
The main switch controls the ignition circuit
as follows:
1
Main switch
OFF:
Ignition circuit is switched off. The engines
cannot be started. (The main switch key can
be removed.)
ON:
Ignition circuit is switched on. (The main
switch key cannot be removed.)
“START/STOP” buttons
The engines can be started or stopped by
pushing the “START/STOP” buttons. It is
possible to start or stop the engines individu-
ally.
PORT:
Port engine
STBD:
Starboard engine
2
1
3
1
2
1
ON
OFF
SportsBoat_F5K10.book Page 33 Tuesday, September 8, 2020 11:29 AM
Downloaded from