background image

INSTRUMENT AND CONTROL FUNCTIONS

3-14

3

Right

EAU12370

Pass switch “PASS” 

Press this switch to flash the head-
lights.

EAU12400

Dimmer switch “

/

” 

Set this switch to “

” for the high

beam and to “

” for the low beam.

EAU12460

Turn signal switch “

/

” 

To signal a right-hand turn, push this
switch to “

”. To signal a left-hand

turn, push this switch to “

”. When re-

leased, the switch returns to the center

position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.

EAU12500

Horn switch “

” 

Press this switch to sound the horn.

EAU12660

Engine stop switch “

/

” 

Set this switch to “

” before starting

the engine. Set this switch to “

” to

stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.

EAU12710

Start switch “

” 

Push this switch to crank the engine
with the starter.

CAUTION:

ECA10050

See page 5-1 for starting instruc-
tions prior to starting the engine.

EAU41700

The engine trouble warning light will
come on when the key is turned to “ON”
and the start switch is pushed, but this
does not indicate a malfunction.

EAU12733

Hazard switch “

” 

With the key in the “ON” or “

” posi-

tion, use this switch to turn on the haz-
ard lights (simultaneous flashing of all
turn signal lights).
The hazard lights are used in case of
an emergency or to warn other drivers
when your vehicle is stopped where it
might be a traffic hazard.

CAUTION:

ECA10061

Do not use the hazard lights for an
extended length of time with the en-
gine not running, otherwise the bat-
tery may discharge.

1. Engine stop switch “

/

2. Start switch “

U4C821E0.book  Page 14  Tuesday, July 17, 2007  11:37 AM

Содержание 2008 YZF-R1X













































































































Отзывы: