Yamaha 2008 YZF-R1X Скачать руководство пользователя | Manualshive

Страница: 17 / 108

background image

INSTRUMENT AND CONTROL FUNCTIONS

3-1

3

EAU10974

Immobilizer system

This vehicle is equipped with an immo-
bilizer system to help prevent theft by
re-registering codes in the standard
keys. This system consists of the fol-
lowing.

●

a code re-registering key (with a
red bow)

●

two standard keys (with a black
bow) that can be re-registered with
new codes

●

a transponder (which is installed in
the code re-registering key)

●

an immobilizer unit

●

an ECU (Electronic Control Unit)

●

an immobilizer system indicator
light (See page 3-7.)

The key with the red bow is used to reg-
ister codes in each standard key. Since
re-registering is a difficult process, take
the vehicle along with all three keys to
a Yamaha dealer to have them re-reg-
istered. Do not use the key with the red
bow for driving. It should only be used
for re-registering the standard keys. Al-
ways use a standard key for driving.

CAUTION:

ECA11821

●

DO NOT LOSE THE CODE RE-
REGISTERING KEY! CONTACT
YOUR DEALER IMMEDIATELY
IF IT IS LOST! If the code re-reg-
istering key is lost, registering
new codes in the standard keys
is impossible. The standard
keys can still be used to start
the vehicle, however if code re-
registering is required (i.e., if a
new standard key is made or all
keys are lost) the entire immobi-
lizer system must be replaced.
Therefore, it is highly recom-

mended to use either standard
key and keep the code re-regis-
tering key in a safe place.

●

Do not submerse any key in wa-
ter.

●

Do not expose any key to exces-
sively high temperatures.

●

Do not place any key close to
magnets (this includes, but not
limited to, products such as
speakers, etc.).

●

Do not place items that transmit
electrical signals close to any
key.

●

Do not place heavy items on any
key.

●

Do not grind any key or alter its
shape.

●

Do not disassemble the plastic
part of any key.

●

Do not put two keys of any im-
mobilizer system on the same
key ring.

●

Keep the standard keys as well
as keys of other immobilizer
systems away from this vehi-
cle’s code re-registering key.

1. Code re-registering key (red bow)

2. Standard keys (black bow)

U4C821E0.book Page 1 Tuesday, July 17, 2007 11:37 AM

«
...
15
16
17
18
19
...
»

Содержание 2008 YZF-R1X













































































































Отзывы:

Нет отзывов

Похожие инструкции для 2008 YZF-R1X

Бренд: AJP Страницы: 191

Бренд: Honda Страницы: 112

Бренд: Qlink Страницы: 44

Бренд: KYMCO Страницы: 69

Бренд: Dennis Kirk Страницы: 5

Бренд: RDMOTO Страницы: 2

690 Enduro R AU/GB 2014

Бренд: KTM Страницы: 18

Minirack 6602533 01 01

Бренд: hepco & becker Страницы: 4

Mambo Evo PURE CARBON

Бренд: LAZER Страницы: 13

Бренд: Biltema Страницы: 2

Бренд: PIAGGIO Страницы: 275

Бренд: Two Brothers Racing Страницы: 2

Бренд: GAS GAS Страницы: 26

Бренд: Honda Страницы: 180

Бренд: Yamaha Страницы: 81

2011 Star XV250A

Бренд: Yamaha Страницы: 90

2011 V Star XVS650A

Бренд: Yamaha Страницы: 94

Бренд: Yamaha Страницы: 102

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды