Yamaha 2006 FJR1300AS, Руководство по обслуживанию

Страница: 122 / 150

YCC-S (Yamaha Chip Controlled-Shift) SYSTEM
– 113 –
Fault code No. Sh_ _36 Symptom Output signal of clutch actuator sensor is ab-
normal.
Order Item/components and probable
cause
Check or maintenance job Reinstatement
method
1 Connections
• Wire harness MCU (motor control
unit) coupler
• Clutch actuator sensor coupler
• Check the coupler for any pins
that may be pulled out.
• Check the locking condition of
the coupler.
• If there is a malfunction, repair it
and connect the coupler se-
curely.
Repairing the
cause of the
malfunction.
2 Open or short circuit in wire harness
and/or sub-lead 1. • Repair or replace if there is an
open or short circuit.
• Between clutch actuator sen-
sor coupler and MCU (motor
control unit) coupler.
(orange–orange)
(orange/green–orange/green)
(blue–blue)
(black/blue–black/blue)
3 Defective clutch actuator sensor. • Replace clutch actuator.