manualshive.com logo in svg

Yamaha 2006 FJR1300AS, Руководство по обслуживанию

Поделиться
Скачать
Yamaha 2006 FJR1300AS Скачать руководство пользователя страница 104

YCC-S (Yamaha Chip Controlled-Shift) SYSTEM

– 95 –

5. Erase the malfunction history in the diagnos-

tic mode. Refer to “Diagnostic code table (Di-
agnostic code No. Sh_ _62)”.

NOTE:

Turning the main switch to “OFF” will not erase 
the malfunction history. 

ET2D21031

DIAGNOSTIC MODE

Setting the diagnostic mode
1. Turn the main switch to “OFF”.
2. Remove the front cowling left inner panel 1 to access the YCC-S test coupler “1”.
3. Remove the protective cap from the YCC-S test coupler.
4. Connect the test coupler adapter “2” to the YCC-S test coupler.

5. Push and hold the hand shift select button “1”, turn the main switch “2” to “ON”, and continue to push 

the button for 8 seconds or more.

NOTE:

• All displays on the meter disappear except the odometer/tripmeter/fuel reserve tripmeter displays.
• “Sh_ _61” appears on the odometer/tripmeter/fuel reserve tripmeter LCD.

6. Select the diagnostic code number corresponding to the fault code number by pushing the hand shift 

select button and operating the brake lever (or brake pedal) simultaneously.

7. Turn the main switch to “OFF” to cancel the diagnostic mode.

 

Test coupler adapter

90890-03149

1

2

1

2

Содержание 2006 FJR1300AS























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды