Yamaha 2005 YZF-R1T Скачать руководство пользователя страница 72 | Manualshive

Страница: 72 / 106

background image

PERIODIC MAINTENANCE AND MINOR REPAIR

6-23

6

EAU22760

Drive chain slack

The drive chain slack should be
checked before each ride and adjusted
if necessary.

EAU22770

To check the drive chain slack

1. Place the motorcycle on a level

surface and hold it in an upright po-
sition.

NOTE:

When checking and adjusting the drive
chain slack, the motorcycle should be
positioned straight up and there should
be no weight on it.

2. Shift the transmission into the neu-

tral position.

3. Move the rear wheel by pushing

the motorcycle to locate the tight-
est portion of the drive chain, and
then measure the drive chain slack
as shown.

4. If the drive chain slack is incorrect,

adjust it as follows.

EAU34310

To adjust the drive chain slack

1. Loosen the axle nut and the lock-

nut on each side of the swingarm.

2. To tighten the drive chain, turn the

adjusting bolt on each side of the
swingarm in direction (a). To loos-
en the drive chain, turn the adjust-
ing bolt on each side of the
swingarm in direction (b), and then
push the rear wheel forward.

NOTE:

Using the alignment marks on each
side of the swingarm, make sure that
both chain pullers are in the same posi-
tion for proper wheel alignment.

CAUTION:

ECA10570

Improper drive chain slack will over-
load the engine as well as other vital
parts of the motorcycle and can lead
to chain slippage or breakage. To
prevent this from occurring, keep
the drive chain slack within the
specified limits.

Drive chain slack:

20.0–25.0 mm (0.79–0.98 in)

1. Drive chain slack

1. Axle nut

2. Drive chain slack adjusting bolt
3. Locknut

4. Alignment marks

U5VY21E0.book Page 23 Friday, September 10, 2004 9:21 AM

«
...
70
71
72
73
74
...
»

Содержание 2005 YZF-R1T











































































































Отзывы:

Нет отзывов

Похожие инструкции для 2005 YZF-R1T

F 850 GS Adventure 2019

Бренд: BMW Motorrad Страницы: 346

Бренд: Suzuki Страницы: 230

Бренд: hepco & becker Страницы: 5

Бренд: KTM Страницы: 26

Бренд: Mallory Страницы: 3

80 MasterGuard (L+K)

Бренд: SCHUBERTH Страницы: 44

Бренд: Shark Страницы: 76

Бренд: Hudora Страницы: 8

Бренд: Deco Страницы: 40

Бренд: PORTMAN Страницы: 13

Бренд: Petzl Страницы: 14

250 EXC Six Days TPI

Бренд: KTM Страницы: 180

Бренд: APRILIA Страницы: 311

Бренд: Gazzini Страницы: 19

Бренд: Gazzini Страницы: 36

Bullet 500 2018

Бренд: Royal Enfield Страницы: 98

Bullet Electra 350 2006

Бренд: Royal Enfield Страницы: 69

Бренд: AFX Страницы: 72

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды