21
3
Now the day will flash, use arrow keys to select the day.
4
Press OK to confirm.
Note: Date will be reset if all power to the unit is lost.
Panel siren
Allows you to set the duration of the siren from disabled
(silent) to 15 minutes in 1 minute steps.
1
Use arrow keys to switch between options.
2
Press OK to confirm.
Note: The factory default is 3 minutes.
Siren Delay
Allows you to delay the siren sounding for a set period of time
to enable the monitoring service to be called prior to notifying
intruder that the alarm has been activated.
1
Press arrow keys to select the option.
2
Press OK to confirm.
3
Select whether you want the siren delayed by up to 10
minutes or disabled.
Note: The factory default is disabled.
Keyfob remote control entry enable
Turns on and off the remote control disarm function.
1
Press arrow keys to select the option.
2
Press OK to confirm.
Note: Remote Control Entry Enable off is set as factory
default.
When the keyfob remote entry enable is set to off it will not
be possible to disarm the control unit when the system is fully
armed unless an entry point device is activated first. This
feature is used to ensure that the system cannot be disarmed
with a stolen remote control without unlocking a door first.
When the keyfob remote control entry enable is set to on ,
the keyfob remote can arm and disarm the control unit as
normal without activating an entry point first.
A panic alarm cannot be disarmed by a keyfob remote. This
prevents an assailant from silencing a personal attack alarm
by snatching the keyfob and pressing Disarm.
Interference
Allows you to set the control unit to respond to the presence
of radio jamming.
1
Use arrow keys to switch between options.
2
Press OK to confirm.
Note: Detection Off is set as factory default. Detection On
will enable the display of any interference that is detected for
more than 30 seconds and will notify the Intamac Home
Manager
TM
Service. Interference will not cause the control unit
to sound an alarm, Radio interference is unlikely, but can
effect the operation of the system. Please read Radio
jamming (page 12) for more information.
Account Number
This is a 5 digit number issued by Intamac that is unique to
your system to identify your control unit when reporting to
Intamac Home Manager
TM
Service.
1
Enter 5 digit number.
2
Press OK to confirm.
Note: This number must be entered to allow reporting to the
intamac Home Manager
TM
Service.
Check-in report
Sends a monitoring signal every 7 days if no other reporting
has occurred in that period, proving the integrity of the system.
1
Use arrow keys to switch between options.
2
Press OK to confirm.
Note: Check-in reporting is disabled as factory default.
Report On/Off
Turns on and off reporting to the Intamac Home Manager
TM
Service.
1
Use arrow keys to switch between options.
2
Press OK to confirm.
Note: Reporting is switched on as factory default; this must
be left on if the Intamac Home Manager“ service is required. If
switched off then the system will operate as a standard Bells
only alarm system without telephone reporting.
Check Telephone Line
Switches on and off telephone line monitoring that will alert
you if the line is disconnected for any reason.
1
Use arrow keys to switch between options.
2
Press OK to confirm.
Note: Telephone line checking is switched on as factory
default.
Mobility check
Used to monitor movements of the elderly or infirm when the
system is disarmed or home armed. If no movement is detected
within a chosen interval an alarm is sent to the Intamac Home
Manager“ service. Intervals of 4, 8 and 12-hours can be
selected.
1
Use arrow keys to switch between options.
2
Press OK to confirm.
Note: Mobility reporting is switched off as factory default.
Open/Close reporting
You can choose between O/C Off , this allows you to select
latch reporting by individual PIN code and keyfob user (see
pages 8, 9 and 23) and O/C On where every Away Arming,
Home Arming and Disarming events are reported to the Intamac
Home Manager
TM
service.
1
Use arrow keys to switch between options.
2
Press OK to confirm.
Note: Open/close reporting is switched off as factory default.
Further PIR programming
The PIR can be used in four different ways within the system:
¥ To cause an instant alarm upon detection when the system is
fully or home armed;
¥ To be omitted when the system is home armed;
¥ To commence an entry countdown upon detection when the
Содержание HSA3095
Страница 27: ...27 ...