Yale HSA3095 Скачать руководство пользователя страница 2

2

Introduction

General system overview

Thank you for choosing the Yale HSA3095

Home-monitoring and Intruder Alarm System. This
simple to install system has been designed with the
user in mind.

Two window stickers are included in the pack.

Please stick them in a front and rear window.  

No connections

All the components are self contained and no

connections are needed between the units. There is
no need to damage the home decor, lift carpets or
run cables. 

Number of devices

You can install up to 20 devices in the system. As

well as extra door/window contacts, PIRs and
smoke detectors, you can add keyfob remote
controls and keypads for added control
convenience.

Long battery life

There is no need to wire into the mains supply or

seek the services of a qualified electrician. The
control unit is powered by a plug top supply and all
other components are powered by battery (all
batteries included).

Batteries will operate for up to 3 years before

they need changing. Regular testing and battery
changes (when notified by the system) will ensure
reliability and peace of mind. Please note that
alkaline batteries must be used as replacements.

Tamper proof system

The security detectors, control panel and external

siren are ’tamper’ protected. Any unauthorised
tampering with these items will result in an alarm.
This feature can be turned off by the user when a
battery change is required.

Unique monitoring

Home Manager is a revolutionary web-based

monitoring service that turns the average house into
an intelligent home, and helps you protect your
home and family against:
¥ Fire
¥ Flood
¥ Burglary
¥ Power failure
¥ Physical threat
¥ Doorstep aggression
¥ Falls by the elderly or infirm

Information and illustrations are subject to change within this document. Yale reserves the right to alter the specification and product
design at anytime without notice. 
Yale¤ is a registered trademark. ' 2003 Security Products UK Ltd. All rights reserved. 

The Home Manager monitors your home,

automatically raising the alarm by text message,
voice call and e-mail to up to 6 people of your
choice if something unexpected occurs, as well as
the internal and external alarm sirens activating.

In addition, the monitoring service allows you to

have complete control of your alarm system over
the internet, with event logs, arm/disarm facility
and safe at home functions. These are innovative
features that offer flexibility and control that you
would expect in this day and age.

Take care of your safety

Display extreme caution when using ladders or

steps, please follow manufacturer s instructions.

Be careful when using hand and power tools and

follow the manufacturer s guidelines when using
them. Take care that the correct tools are used.
Wear goggles or protective clothing where required.

The external Siren is extremely loud, please

ensure you replace the cover and retreat to a safe
distance before testing.

Warranty

Please complete and return the warranty card.

Yale offer extended periods of warranty, please see
warranty card for details.

Calling for help

Yale have a helpline team who are there to offer

advice or solve problems over the phone.

Helpline 01902 635998

Helpline service available 9am-5pm Monday to

Friday.

Caution

The dialling facilities must only be used with

persons who have consented to being contacted by
the system.

The system is not to be used to make 999

emergency calls directly. Yale do not hold
responsibility for any actions taken by emergency
services for incorrect use of the dialling facility.

Содержание HSA3095





























Отзывы: