manualshive.com logo in svg

Yale HSA3095, Инструкция по установке, Страница: 19 / 28

Поделиться
Скачать
Yale HSA3095 Скачать руководство пользователя страница 19

19

a tamper alarm when the system is disarmed. To
enable the display to be cleared a tamper condition
has to be rectified. For example, if a detector has
been tampered the display can only be cleared
once the detector tamper has been closed. The
display is cleared by entering your PIN code,
pressing OK, and exiting the  Arm Home  display by
pressing

.

Please note that detector tampers will trigger an

alarm even when the system is disarmed. If you
wish to take down a detector that has tamper
protection ensure the control unit is in  Walk Test
mode.

Low battery display

When a detector s batteries are running low, it will

signal its condition to the control unit when it is
activated. To be able to clear the display the
batteries in the detector will have to be changed.
Always use alkaline batteries as replacements and
ensure the control unit is in  Walk Test  when taking
down detectors. After changing batteries, once the
detector is activated (out of  Walk Test  mode), the
display can be cleared as described in  Tamper
display .

Содержание HSA3095





























Отзывы:

Нет отзывов