20
20
Install Crossbars
Tighten to
23 ft. lbs (31N-m)
.
Position with Crossbar on Slip Tower over T-Bolts. Attach washers and nuts.
top of aluminum blocks.
T-Bolts in Side Rail
Slide four (4) T-Bolts into each of the Side Rails as shown.
Place aluminum blocks as shown – roughly in line with the Cross-members
(or where you need them for your intended use with or without roof rack
hardware). Make sure they end up positioned to place more weight in front
of the wheels than behind. You need 10-15% of gross weight on the end of
the tongue at the hitch.
Place the Round Crossbars on top of aluminum blocks. Use tape measure
to center them left to right.
Slide the aluminum Towers over the Round Bar. Line up holes in aluminum
towers with T-Bolts.
Install the flat washers and 17mm nylock nuts and
tighten to 23 ft. lbs
(31N-m)
.
