background image

6

6

Loading Gear

MAXIMUM GROSS TRAILER 
WEIGHT

Your maximum gross trailer weight, 
or gross vehicle weight rating 
(GVWR) is 400 lbs. (181kg). This 
is the combination of the trailer’s 
empty weight (approximately 150 
lbs. (68kg)) and its maximum cargo 
weight of 250 lbs. (113kg). If your 
RACKandROLL 78 trailer model 
has the heavy-duty shocks (orange/
blue color), your GVWR is 450 lbs. 
(204kg) with a maximum cargo 
weight of 350  lbs. (159kg).

WEIGHT DISTRIBUTION

A minimum of 10% to 15% of the total weight of the trailer and 
cargo should be on the tongue coupler. With your trailer loaded, 
place a bathroom scale under each wheel and under the tongue 
coupler. Add all three numbers for the total weight. Confirm that 
10-15% of this number is on the tongue coupler. (

For example, 

a maximum load of 250 lbs. (113kg) (results in a 400 lb. (181kg) 
total GVWR weight, so the tongue coupler should “weigh” 40-60 
lbs. (18-27kg))

  In general, 60% of your cargo weight should be 

forward of the wheels. You must also balance the weight from 
side to side. Adjust the load and/or the front-to-rear location of 

the crossbars if necessary so the weight is 
centered and slightly forward on the trailer 
frame.

ATTACHING YOUR GEAR

Use Yakima

®

 roof rack system hardware to 

attach gear to your RACKandROLL trailer 
crossbars. You can think of your trailer as 
a roof rack with its own wheels. 

Follow manufacturers’ 
recommendations and instructions for 
the proper and safe attachment of your 
accessories and gear.

Whether you want to carry kayaks, 

canoes, bicycles, or secure your gear in our aerodynamic boxes, 
you can take advantage of the world’s most popular roof rack 
carrying systems and accessories from Yakima to meet your 
needs. If you carry a boat and accessories, make sure you meet 
applicable state regulations regarding using a red flag (day) and 
marker light (night) if the boat overhangs a given number of feet 
off the rear, as determined by the state(s) in which you travel.

WARNING:

GEAR LOADED WITH A HIGH CENTER OF 

GRAVITY INCREASES THE POSSIBILITY 

OF A TRAILER ROLL-OVER IN CERTAIN 

SITUATIONS. 

Serious injury or death

 can also result if you 

load the trailer without enough weight on the 
tongue coupler; the trailer may fishtail and 
cause a loss of control of the tow vehicle. Long 
boats should be tied at the front to the tongue 
to keep boats from rocking.

Содержание rackandroll 66
























Отзывы: