Screw License Bracket
to Center Rail with 4
small screws (picture
8B
). Use screwdriver –
a
cordless drill can damage
screws and holes.
Insert black rubber Plug
(socket holes up) into
bottom of Grey Light
Base (picture
8C
).
Screw Grey Light Base to License Bracket with 2 screws by hand (picture
8D
).
Snap White Light into the Grey Light Base (picture
8E
). Note grey face of
light faces rear. Connect black wire on light to wire from Center Rail and tuck
excess wire back into the frame.
17
Install License Bracket and Light
Lay the Center Rail flat on its mounting brackets
and lay out the parts as shown. Per picture
8A
,
parts are counter-clockwise from upper left in order
of assembly:
(1) License Bracket
(4) Small screws to attach License Bracket
to Center Rail (hard to see in photo)
(1) Grey Light Base
(2) Screws to attach Grey Light Base
to License Bracket
(1) Black rubber Plug
(1) White Light
(1) Center Rail
8A
Lay out parts
License Bracket & Light installed
8B
Screw on License Bracket
8C
Insert plug into grey base
8D
Screw on grey base
8E
Snap on Light
Grey face
of light