Yaesu WIRES-X FT3D, Инструкция по эксплуатации

Страница: 43 / 62

42
2. Rotate the DIAL knob to select the category [ C1 ] to [ C5 ] and then press the
DIAL knob.
Displays the node and room lists.
• For details on registering nodes and rooms, see “
Registering the connected
node or room in the category list
” (page 45).
• Connection destinations are displayed from the room list and then node list.
• On the connection destination room columns, the number of activities (the
number of nodes connected to each room) appears on the right side.
Items may be listed in order according to the number of activities, or access
history from [
WIRES-X
]→[
2 SEARCH SETUP
] in the setup menu.
ALL
SEARCH & DIRECT
C1:TOKYO
C2:FISHING
C3:
– – – – – – – – – – – – – – – –
C4:
– – – – – – – – – – – – – – – –
CATEGORY
3. Rotate the
DIAL
knob to select the node or room and then press the
DIAL
knob
to start a connection.
• Once connection is successfully established, “
Connected
” will appear on the
LCD.
• If connection is unsuccessful, an error message appears and the screen
returns to the list of nodes and rooms.
CQ-JAPAN 123
JA1YOE-TKY-ROOM 42
C1:TOKYO
④ Connecting to the node or room you have most recently connected
1. If you have connected to a node or room on the Internet before, the last con-
nected node or room will blink at the bottom of the screen.
• Rotate the
DIAL
knob to select the blinking node or room and press the DIAL
knob or the PTT switch to start connection.
• If connection is unsuccessful, an error message appears and the name flash-
es again.
JQ1YBG-ND Shinagawa-
JA1YOE-ROOM12345
SEARCH & DIRECT
⑤
Entering the DTMF ID number (5 digits) of the node or the room
1. Press and hold the [ # ] key on the microphone.
Displays the DTMF ID input screen.
2. Enter the 5-digit DTMF ID.
3. Press the [
# ] key on the microphone to start a connection.
• Once connection is successfully established, “ Connected ” will appear on the
LCD.
• If connection is unsuccessful, an error message appears and the screen re-
turns to the DTMF ID input screen.
• Press the [

] key on the microphone to cancel the DTMF input screen.
JQ1YBG-ND Shinagawa-
SEARCH & DIRECT