Yaesu WIRES-X FT3D, Инструкция по эксплуатации

Страница: 22 / 62

21
Basic Operation
Refer to “ Using the Portable Digital Node Mode ” or “ Using the Portable HRI Mode ” (page 47) according to the
mode to be used.
Using the Portable Digital Node Mode
Connecting the transceiver and the PC
Refer to “
Communicating only with C4FM digital mode (Portable Digital Node Mode)
” (page 13) and connect
the transceiver to the PC.
Starting the WIRES-X software
1. Double click the [ Wires-X ] icon on the desktop of the computer screen.
The main screen of WIRES-X software is displayed.
For details on the main screen, refer to “ WIRES-X Software Main Screen ” (page 51).
Starting the transceiver in special mode

FT3DR/DE or FT2DR/DE
1. Press and hold the [ X ] key, [ BAND ] key and the POWER switch to turn the transceiver ON .
“ PDN ” is displayed on the LCD screen.
2. Press the [ A/B ] key to select “ Access Point ” or “ Direct Operation ”.
Depending on the operation mode chosen, the frequency display will show as follows:
Access Point: “
（
Frequency display
）
”
Direct Operation: “DIRECT”

FTM-400XDR/XDE or FTM-400DR/DE
1. Press and hold the [ DX ] key and the POWER switch to turn the transceiver ON .
“
PDN
” is displayed on the LCD screen.
2. Press the Band B DIAL knob (Lower) to select “ Access Point ” or “ Direct Operation ”.
Depending on the operation mode chosen, the A band frequency display will show as follows:
Access Point: “
（
Frequency display
）
”
Direct Operation: “DIRECT”

FTM-300D
1. Press and hold the [ DX ] key and the POWER switch to turn the transceiver ON .
“ WIRES-X PDN ” is displayed on the LCD screen.
2. Press the [ A/B ] key to select “ Access Point ” or “ Direct Operation ”.
Depending on the operation mode chosen, the display will show as follows:
Access Point: “
（
Frequency display
）
”
Direct Operation: “DIRECT”

FTM-100D
1. Press and hold the [ DX ] key and the POWER switch to turn the transceiver ON .
“ PDN ” is displayed on the LCD screen.
2. Press the [ A/B ](DW) key to select “ Access Point ” or “ Direct Operation ”.
Depending on the operation mode chosen, the sub frequency display will show as follows:
Access Point: “
（
Frequency display
）
”
Direct Operation: “DIRECT”
• To return the transceiver to the normal mode, repeat procedure 1 above.
• To switch between “
Portable Digital Node Mode ” and “ Portable HRI Mode ”, start with the normal mode first and then
perform the above operation.
• The portable station transceiver cannot use the News Station feature or the GM feature.