Yaesu VX-8GR/GE, Руководство по эксплуатации

Страница: 99 / 168

VX-8GR/GE O
PERATING
M
ANUAL
97
S
ELECTING THE
EAI
MODE AND ITS
T
RANSMIT
T
IME
1. Press and hold the
m
key for one second to enter the Set Mode.
2. Rotate the
DIAL
knob to select Set Mode Item 28: EAI TIME .
3. Press the
m
key briefly to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the desired transmit time
( 1 - 10 , 15 , 20 , 30 , 40 , and 50 minutes).
5. Press the
PTT
switch briefly to save the new setting and
exit to normal operation.
A
CTIVATING THE
EAI
FEATURE
1. Set the operating band of the transceiver to “A-Band”.
The EAI feature is not activated in the “B-Band”.
2. Press and hold the
m
key for one second to enter the Set Mode.
3. Rotate the DIAL knob to select Set Mode Item
27: EAI
.
4. Press the
m
key briefly to enable adjustment of this Set
Mode Item.
5. Rotate the
DIAL
knob to select “ ON ” (thus activating the
EAI feature).
6. Press the
PTT
switch briefly to save the new setting and
exit to normal operation (with EAI feature “ON”).
When the EAI feature is activated, the “ EAI ” icon will appear at
the bottom of the display.
To disable the EAI feature, just repeat the above procedure, ro-
tating the
DIAL knob to select “
OFF
” in step “4” above.
The
VX-8GR/GE
will ignore the EAI feature when (1) the operating band is
set to “B-Band”, (2) the squelch is open, (3) there is an incoming signal on
the operating frequency, (4) the operating frequency is the same as the fre-
quency which is stored in the Memory Channel “EAI,” or (5) a VHF frequency is
stored in Memory Channel “EAI”.
E
MERGENCY
F
EATURE
E
MERGENCY
A
UTOMATIC
ID
(
EAI
)
F
EATURE