Yaesu VX-8GR/GE, Руководство по эксплуатации

Страница: 24 / 168

VX-8GR/GE O
PERATING
M
ANUAL
22
A
DJUSTING THE
K
EYPAD
B
EEPER
V
OLUME
L
EVEL
A keypad beeper provides useful audible feed back whenever a key button is pressed. The
keypad beeper level changes according to the receiver audio volume level setting. How-
ever, you may adjust the volume balance between the receiving audio and keypad beeper
using Set Mode Item
9: BEEP LEVEL
.
1. Press and hold the
m
key for one second to enter the Set Mode.
2. Rotate the
DIAL
knob to select Set Mode Item 9: BEEP
LEVEL
.
3. Press the
m
key briefly to enable selection of this Set
Mode Item.
4. Rotate the
DIAL
knob to select the desired level.
5. When you have made your choice, press the PTT switch to
save the new setting and return to normal operation.
Additionally, if you want to turn the beep off:
1.
Press and hold the
m
key for one second to enter the Set Mode.
2. Rotate the DIAL knob to select Set Mode Item
11: BEEP
SELECT .
3. Press the
m
key briefly to enable selection of this Set
Mode Item.
4. Rotate the DIAL knob to change the setting to “
OFF
”.
5. When you have made your choice, press the
PTT
switch to
save the new setting and return to normal operation.
6. If you wish to re-enable the Beeper, just repeat the above
procedure, rotating the
DIAL knob to select “
KEY
” or “
KEY & SCAN
” in step “4”
above.
KEY
: The beeper sounds when you press any key.
KEY & SCAN : The beeper sounds when you press a key or when the scanner stops.
S
ETTING THE
F
REQUENCY
D
ISPLAY
I
MAGE
S
IZE
When operating in “Mono” band, pressing the
a
or
b
key, causes the LCD to “toggle”
between display of double-size characters and large characters. However, this feature
does not work during Dual Receive operation, as both the “Main” band and “Sub” band
frequencies are shown on the display.
A
DVANCED
O
PERATION
L
ARGE
C
HARACTERS
D
OUBLE
-
SIZE
C
HARACTERS