VX-7R O
PERATING
M
ANUAL
52
Moving Memory Data to the VFO
Data stored on memory channels can easily be moved to VFO, if you like.
1.
Select the memory channel containing the frequency data to be moved to VFO.
2.
Press and hold in the
key for 1/2 second, then press the
key. The data will
now have been copied to VFO, although the original memory contents will remain
intact on the previously-stored channel.
If a Split Frequency Memory channel was transferred, the Tx frequency will be
ignored (you will be set up for Simplex operation on the Receive frequency).
Memory Only Mode
Once memory channel programming has been completed, you may place the radio in a
“Memory Only” mode, whereby VFO operation is impossible. This may be particularly
useful during public-service events where a number of operators may be using the radio for
first time, and ultimate simplicity of channel selection is desired.
To place the radio into the Memory Only mode, turn the radio off. Now press and hold in
the
key while turning the radio on.
To return to normal operation, repeat the above power-on procedure.
M
EMORY
M
ODE
