VX-7R O
PERATING
M
ANUAL
50
M
EMORY
M
ODE
R
EGULAR
M
EMORY
C
HANNEL
O
PERATION
Masking Memories
There may be situations where you want to “Mask” memories so they are not visible during
memory selection or scanning. For example, several memories used only in a city you visit
infrequently may be stored, then “Masked” until you visit that city, at which time you can
“Unmask” them for normal use.
1.
Press the
key, if needed, to enter the MR mode.
2.
Press and hold in the
key for 1/2 second, then rotate the
DIAL
to select the memory
channel to be “Masked” from view.
3.
Press the
key. The display will revert to memory channel #1. If you rotate the
DIAL
to the location you just “Masked,” you will observe that it is now invisible.
4.
To Unmask the hidden memory, repeat the above procedure: press and hold in the
key for 1/2 second, rotate the
DIAL
to select the masked memory’s umber, then press
to restore the memory channel’s data.
Watch out! You can manually store data over a “Masked” memory, deleting
previous data, if you’re not careful. Use the “next available memory” tech-
nique (look for the
[
Û
]
icon) storage technique to avoid over-writing a masked
memory.
