VX-7R O
PERATING
M
ANUAL
47
M
EMORY
M
ODE
R
EGULAR
M
EMORY
C
HANNEL
O
PERATION
Memory Recall
1.
While operating in the VFO mode, press the
key to
enter the Memory mode.
2.
Rotate the
DIAL
to select the desired channel.
3.
To return to the VFO mode, press the
key..
1) When the radio is already set to the Memory mode, an easy way to recall
memories is to key in the memory channel number, then press the
key..
For example, to recall memory channel #14, press
à
à
.
2) Memory channels on which you may have stored frequencies outside the amateur
bands cannot be recalled on the SUB band.
HOME Channel Memory
A special one-touch “HOME” channel is available (one for
each of the 12 (USA version) or 11 (EXP version) operating
bands: see page 15), to allow quick recall of a favorite operat-
ing frequency on each band. Memory storage is simple to ac-
complish:
1.
Select the desired frequency, while operating in the VFO mode. Be sure to set up any
desired CTCSS or DCS tones, as well as any desired repeater offset. The power level
may also be set at this time, if you wish to store it.
2.
Press and hold in the
key for 1/2 second.
3.
While the memory channel number is blinking, just press the
key. The frequency
and other data (if any) will now be stored in the special HOME channel register.
4.
You may repeat this process on the other operating bands.
5.
To recall the HOME channel, press the
key, then press the
key while operat-
ing either in the VFO or MR mode.
Note that the UHF HOME channel is the one used during “Emergency” opera-
tion. See page 39 for details regarding this feature.
