8
Mode Setting
Display for 4 different kinds of the following modes will be changed
automatically when pressing START BUTTON until it sounds peep
L Mode (Label setting Mode)
C Mode (Count-Up-Mode)
P Mode (Count-Down-Mode)
F Mode (Motor Speed setting Mode)
Display L on the left side and 3 digits will be displayed
■
Make sure that there is no label on the sensor.
■
Forward label gradually while pressing FWD BUTTON briefly and set the
proper position where you can take it easily.
・
Display 0 on the panel if press FWD BUTTON when no label on the
sensor and start counting if label passes though the sensor.
・
As long as there is a label on the sensor, it will not start counting even if
pressing START BUTTON.
・
If label passes over the sensor, please follow the instruction from the
beginning.
■
Make sure about stop position while pressing START BUTTON and feeding
label.
・
Adjust the stop position for label like press +button when label stops at
short distance and press -button when label passes over.
(the numerical value displays on the panel is just for your reference)
・
Take the label and press START BUTTON in order to feed label.
・
Set the proper position by doing several times as mentioned above.
The number from 0 to 9999 will be displayed.
Press Auto/Manual Button longer time when resetting to the number of 0.
Only one digit displays on the panel when resetting.
■
When taking one label on the sensor, it will be counting as one.
・
This mode starts from 0 and ends at 9999. After that, the number will
revert to 0.
Displays P to the left side and follows 3 digits from 0 to 999
■
Set the number from 1 to 999 by pr and -button as you prefer.
■
Increase the number by 1 if pr and -Button shortly and the number
increase will depend on pr and -button longer time.
■
When Count-Down-Mode is completed, it will be automatically reset to the
original number that you have set.
Display F to the left side and follows the number from 50 to 100 increased
by 10.
Accuracy will be improved if Moter Speed Setting Mode is low.
Motor speed is arranged by 50 when delivering from our plant.
■
Adjust motor speed from 50 to 100 by pr and -button.
・
Motor speed is set by 100 if displays 100 on the panel.
Set L-mode
Set C-mode
Set P-mode
Set F-mode
Press Start Button longer
Press Start Button longer
Press Start Button longer
Press Start Button longer
Indicate L
Feed label and set
the peoper position
Take out the label
Take out
the label
adjust
Check the
stop position
Only indicate
number
Set Zero
Press Auto/Manual
switch longer
Indicate P
Indicate F
Set count-down
Set motor speed
O.K.
