Yaesu FTM-6000R, Руководство по эксплуатации

Страница: 4 / 48

2
Basic Operation
Turning the Transceiver ON
1. Press and hold the Power (Lock) switch to turn the
transceiver ON .
z
Turning the transceiver OFF
Press and hold the Power (Lock) switch again to turn
the transceiver OFF.
Adjusting the volume
1. Rotate the DIAL knob to adjust the volume to a com-
fortable level.
Adjusting the squelch level
Annoying noises can be muted when a signal cannot be detected. Normally, use the fac-
tory settings, but adjust the squelch if noise is harsh.
1. Press the [
SQL back ] key, and then rotate the DIAL
knob to adjust to a level at which the background noise
is muted.
2. After the adjustment, press the [ SQL back ] key again,
or do nothing for about 2 seconds, the SQL meter will
return to the normal screen.
When the squelch level is increased, the noise is more likely to be silenced, but it may become
more difficult to receive weak signals.
Selecting a Frequency Band
Press the [ BAND grp ] key to select the desired frequen-
cy band.
AIR Band 108MHz - 137MHz
144MHz Band 137MHz - 174MHz
VHF Band 174MHz - 400MHz
430MHz Band 400MHz - 480MHz
UHF Band 480MHz - 999.995MHz
Unwanted frequency bands can be set in the menu list so they are not displayed.
Press and hold the [ F menu ] key → Rotate the DIAL knob to select [ 18 BND.SEL ] → Press
the DIAL knob → Rotate the DIAL knob to select a band → Press the DIAL knob → Rotate
the DIAL knob to select ON or OFF.