Yaesu FTM-6000R, Руководство по эксплуатации

Страница: 20 / 48

18
Using the Memory
The FTM-6000R/E incorporates a large number of memory channels that can register
the operating frequency, communication mode, and other operational information.
• 999 Memory Channels
• 1 Home Channel
• 50 pairs PMS Memory Channels
The operating frequency and other operational information can be registered to each
regular memory channel, home channel, or PMS memory channel:
• Operating frequency • Frequency Step • Transmitter output
• Memory tag • Repeater Shift • Tone information
• DCS information • Memory channel skip information
NOTE
Make sure to keep a separate record of the information registered to the memory channels.
Writing to memory
1. Set the frequency to write to memory.
2. Press and hold the [
V/M mw ] key.
• “ ” icon and a memory number will appear (blink-
ing) on the display.
• The lowest number that is not already stored in
memory is selected. To select another channel, ro-
tate the DIAL knob to select the memory channel
number to be written.
• Press the DIAL knob to fast-forward in 10 channel
steps.
If the channel is already occupied by previously stored
data, the “channel number” will light up on the display.
3. Press and hold the [
V/M mw
] key to save the entry and
exit to normal operation.
If you attempt to register a frequency to a memo-
ry channel that already contains frequency data,
“OVWRT?” will appear on the screen. Press the
[
V/M mw
] key to overwrite the memory channel.
z
Split Memory
Two different frequencies, one for receive and another for transmit, can be registered to
a memory channel.
For additional details on the Split Memory, refer to the Advanced Manual which may be
downloaded from the Yaesu website.