Yaesu FT DX 1200, Руководство по эксплуатации

Страница: 114 / 140

Page 112
FT
DX
1200 O
PERATING
M
ANUAL
AGC G
ROUP
001 FAST DELAY
Function Sets the delay time for the $ GC F $ ST mode.
$ vailable Values 0 a 4000 msec 0 msec step)
' efault Setting 00 msec
002 MID DELAY
Function Sets the delay time for the $ GC 0 I ' mode.
$ vailable Values 0 a 4000 msec 0 msec step)
' efault Setting 1000 msec
003 SLOW DELAY
Function Sets the delay time for the $ GC SL 2 W mode.
$ vailable Values 0 a 4000 msec 0 msec step)
' efault Setting 4000 msec
004 AGC SLOPE
Function Select the gain curve of the $ GC ampli ¿ er.
$ vailable Values 1250$ L SL 23(
' efault Setting 1250$ L
1250$ L The $ GC output level will follow a linear
response to the antenna input level, while
$ GC is activated.
SL 23( The $ GC output level will increase at 1 10
the rate of the antenna input level, while
$ GC is activated.
008 TFT LAYOUT
Function Set the positions of the fre T uency display and
meter display.
$ vailable Values TY 3( 1 TY 3(
' efault Setting TY 3( 1
TY 3( 1 ' isplays the fre T uency display at the top of
the TFT display.
TY 3( ' isplays the fre T uency display below the S
32 meter and the ' S 3 display.
009 DIMMER LED
Function Sets the indicator illumination level.
$ vailable Values 1
' efault Setting
$ djusts the illumination level of the indicator located
on the above of the 0 ain Tuning ' ial knob. You may
observe the effects of the changes as you adjust the
level setting. The higher the setting, the brighter the
illumination becomes.
010 DIMMER TFT
Function Setting of the TFT display brightness level.
$ vailable Values 0 a 1
' efault Setting 8
011 BAR DISPLAY SELECT
Function Selects one of three parameters to be viewed
on the Tuning 2 ffset Indicator.
$ vailable Values CL $5 CW TU 1( uTU 1(
' efault Setting CW TU 1(
CL $5 ' isplays relative clari ¿ er offset.
CW TU 1( ' isplays relative tuning offset between the
incoming signal and transmitted fre T uency
while in CW operation.
uTU 1( ' isplays the peak position of the optional
u
-TU 1( ¿ lter.
012 METER TYPE SELECT
Function Selects the meter display type.
$ vailable Values $1$ L 2 G B $5
' efault Setting $1$ L 2 G
$1$ L 2 G ' isplays relative clari ¿ er offset.
B $5 ' isplays relative tuning offset between the
incoming signal and transmitted fre T uency
while in CW operation.
013 BAR MTR PEAK HOLD
Function Selects the peak hold time of the B $5 meter.
$ vailable Values 2 FF 0. 1.0 .0 sec
' efault Setting 2 FF
014 ROTATOR START UP
Function Selects the starting point of your rotator
controller's indicator needle.
$ vailable Values 0 0 180 70 ƒ
' efault Setting 0 ƒ
$ dvice If the optional $ ntenna 5 otator is not
connected, this adjustment has no effect.
DISPLAY G
ROUP
005 MY CALL
Function 3 rograms your Call Sign.
$ vailable Values 0 ax 1 characters
' efault Setting FT '; 1 00
006 MY CALL TIME
Function 3 rograms the display period of your Call Sign.
$ vailable Values 2 FF a sec
' efault Setting 1 sec
007 VFO COLOR
Function Selects the VF 2 - $ fre T uency background
color.
$ vailable Values BLU ( S . Y BLU ( G 5((1
3 U 53 L ( 5(' 25$1 G ( G 5$ Y BL $ C .
' efault Setting BLU (
M
ENU
M
ODE
AGC start