Page 108
FT-950 O
PERATING
M
ANUAL
AGC G
ROUP
001 AGC FST DLY
Function
: Sets the delay time for the AGC FAST mode.
Available Values
: 20 ~ 4000 msec (20 msec/step)
Default Setting
: 300 msec
002 AGC MID DLY
Function
: Sets the delay time for the AGC MID mode.
Available Values
: 20 ~ 4000 msec (20 msec/step)
Default Setting
: 700 msec
003 AGC SLW DLY
Function
: Sets the delay time for the AGC SLOW mode.
Available Values
: 20 ~ 4000 msec (20 msec/step)
Default Setting
: 3000 msec
DISPLAY G
ROUP
004 DISP COLOR
Function
: Selects the Display color when the optional Data
Management Unit (
DMU-2000
) is connected.
Available Values
: bL1/bL2/bL3/ub1/ub2
Default Setting
: bL1 (COOL BLUE)
bL1: COOL BLUE
bL2: CONTRAST BLUE
bL3: FLASH WHITE
ub1: CONTRAST UMBER
ub2: UMBER
A
DVICE
:
If the optional
DMU-2000
Data Management Unit is not
connected, this adjustment has no effect.
005 DISP DIM VFD
Function
: Setting of the display brightness level.
Available Values
: 0 ~ 15
Default Setting
: 8
006 DISP BAR SEL
Function
: Selects one of three parameters to be viewed
on the Tuning Offset Indicator.
Available Values
: CLAr/C-tn/u-tn
Default Setting
: C-tn
CLAr: Displays relative clarifier offset.
C-tu: Displays relative tuning offset between the incom-
ing signal and transmitted frequency while in CW
operation.
u-tn: Displays the peak position of the optional
μ
-TUNE
filter.
007 DISP PKH S
Function
: Selects the peak hold time of the S-meter.
Available Values
: OFF/0.5/1.0/2.0 sec
Default Setting
: OFF
008 DISP PKH PO
Function
: Selects the peak hold time of the PO meter.
Available Values
: OFF/0.5/1.0/2.0 sec
Default Setting
: OFF
009 DISP PKH ALC
Function
: Selects the peak hold time of the ALC meter.
Available Values
: OFF/0.5/1.0/2.0 sec
Default Setting
: OFF
010 DISP PKH ID
Function
: Selects the peak hold time of the ID meter.
Available Values
: OFF/0.5/1.0/2.0 sec
Default Setting
: OFF
M
ENU
M
ODE
