manualshive.com logo in svg

Yaesu FT-857 series, Руководство по эксплуатации

Поделиться
Скачать
Yaesu FT-857 series Скачать руководство пользователя страница 100

98

FT-857 Operating Manual

MENU MODE No•008 

[

ARTS BEEP

]

Function

: Selects the ARTS beep mode.

Available Values

: OFF/RANGE/ALL

Default

: RANGE

OFF:

No alert beeps sound; you must look at the display to determine current ARTS
status.

RANGE: A high tone beep will sound when the transceiver first detects that you are within

range, and a low beep will sound when the other station goes out of range.

ALL:

A high tone beep will sound every time a polling transmission is received from
the other station, and a low beep will sound once when the other station goes out
of range.

MENU MODE No•009 

[

ARTS ID

]

Function

: Enables/disables the CW identifier during ARTS operation.

Available Values

: ON/OFF

Default

: OFF

MENU MODE No•010 

[

ARTS IDW

]

Function

: Stores your callsign into the CW identifier. Up to ten characters may be stored.

The storage procedure is as follows:
1. Press the 

SELECT

 knob momentarily to initiate callsign storage (the first character

location of the callsign will be underlined).

2. Rotate the 

DIAL

 knob to select the first letter/number of your callsign, then rotate the

SELECT

 knob one click clockwise to save the first letter/number and move to the next

entry position.

3. Repeat the previous step as many times as necessary to complete your callsign.
4. Press the 

SELECT

 knob to save your completed callsign and exit.

Default

: YAESU

MENU MODE No•011 

[

BEACON TEXT 1

]

Function

: Stores the message for the Beacon. Up to 40 characters may be stored. The stor-

age procedure is as follows:
1. Press and hold in the [

FUNC

] key for one second to enter the Menu mode.

2. Rotate the 

SELECT

 knob to select Menu Mode 

No-011 

[

BEACON TEXT 1

]

.

3. Press the 

SELECT

 knob to enable storage of the Beacon Text (the first character loca-

tion will be underlined).

4. Rotate the 

DIAL

 to select the first character (number or letter) in the Beacon Text you

wish to store, then rotate the 

SELECT

 knob one click clockwise to move to the next

character.

5. Repeat step 4 as many times as necessary to complete the Beacon Text.
6. If the Beacon Text is less than 40 characters or more than 40 characters, see page 90 for

details.

M

ENU

 O

PERATION

Содержание FT-857 series





































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды